Trade RAMS Templates — Every UK Construction Trade
Browse RAMS templates for every UK construction trade. Our AI generator covers 40+ specialist trades — from groundworks and steelwork through to M&E, cladding, and specialist fit-out. Every template is CDM 2015 compliant and aligned with current HSE guidance.
Ground & Structure
- Groundworks — Excavation, drainage, and sub-structure works
- Piling & Foundations — CFA, driven, bored, and micro-piling
- Concrete Works — Foundations, slabs, columns, and formwork
- Structural Steelwork Erection — Steel frame, decking, and connections
- Underpinning & Ground Stabilisation — Sequential bay and grouting works
- Bulk Excavation & Earthworks — Cut and fill, compaction, and spoil disposal
- Contaminated Land Earthworks — Remediation, waste classification, and monitoring
- Utility Strike Prevention — CAT scanning, permit to dig, and emergency response
- Basement Waterproofing — Tanked systems, cavity drain, and sump pumps
- Civils — Road construction, retaining walls, and utilities
- Drainage — Below-ground drainage and confined space entry
- Asphalt Surfacing Works — Hot-rolled asphalt, paving machines, and traffic management
Facade & Envelope
- Scaffolding — Tube-and-fitting, system scaffold, and independent scaffolds
- Roofing — Flat roofing, pitched roofing, and waterproofing membranes
- Commercial Cladding & Facades — Rainscreen, composite panels, and fire compliance
- Curtain Walling & Structural Glazing — Unitised systems, point-fixed glass, and glass fins
- Modular & Volumetric Construction — Module crane lifts and stacking sequences
- Bricklaying — Cavity wall construction and masonry works
Interior & Specialist Fit-Out
- Fit-Out — Commercial office and retail fit-out works
- Raised Access Floor — Pedestal installation and below-floor service access
- Demountable Partitioning — Movable walls, glazed sections, and acoustic sealing
- Acoustic Ceiling & Wall Lining — Mineral wool, baffles, and fabric panels
- Specialist Tiling — Large-format porcelain, natural stone, and silica dust controls
- Epoxy Resin Flooring — Self-smoothing screeds, anti-static, and COSHH controls
- Carpentry & Joinery — First and second fix carpentry
- Painting & Decorating — Surface preparation, spray painting, and solvents
- Mould Remediation — Containment, biocide application, and verification testing
- Landscaping — Hard and soft landscaping, tree works, and plant operations
Building Services & M&E
- Mechanical & Electrical — Full M&E installations
- Electrical — First and second fix, distribution, and testing
- Plumbing — Hot and cold water, sanitation, and commissioning
- HVAC — Ductwork, air handling units, and commissioning
- Underfloor Heating (Wet Systems) — Pipe loops, pressure testing, and commissioning
- Pressurisation Equipment — Expansion vessels, PRVs, and PSSR 2000
- Lightning Protection Systems — Air termination, conductors, and BS EN 62305
- Emergency Lighting — BS 5266 commissioning and testing
Specialist & Hazardous Works
- Asbestos Removal — Licensed and notifiable asbestos work per CAR 2012
- Demolition — Structural demolition, hand demolition, and soft strip
- Steel Erection — Structural steel frame and crane operations
- Industrial Racking & Shelving — Pallet racking, BS EN 15512, and forklift segregation
Why Use RAMS AI for Trade RAMS?
RAMS AI generates professional, CDM 2015 compliant RAMS documents in approximately 15 minutes — compared to 2-4 hours for manual preparation. Each template includes:
- Pre-built UK hazard library with over 100 construction hazards and HSE-aligned controls
- Trade-specific method statement sections with regulatory references
- COSHH substance flags and triggers for hazardous material assessment
- Digital sign-off for operatives via magic link — no app required
- Professional PDF export with company branding