Renewables RAMS – AI-Generated Risk Assessments for MCS, F-Gas & DNO Registered Contractors
Generate comprehensive Renewables RAMS documents with AI. Built for MCS-certified installers, F-Gas-registered engineers, and DNO-approved contractors working on solar PV, air source heat pumps, ground source heat pumps, battery storage systems, and EV charging infrastructure. Every document references MCS installation standards, G98/G99 DNO grid connection requirements, F-Gas Regulations 2015, Electrical Safety Standards (BS 7671:2018), and the Work at Height Regulations 2005.
Key Features
- MCS-Aligned Content – Risk assessments and method statements reference MCS 001 (heat pumps) and MCS 012 (solar PV) installer certification scheme requirements throughout
- F-Gas Compliance – Heat pump RAMS includes F-Gas Regulations 2015 controls covering refrigerant handling, leak checks, F-Gas certificate requirements, and refrigerant log obligations
- DNO & G98/G99 Requirements – Solar PV and battery storage RAMS reference G98 (installations up to 16 A/phase) and G99 (larger installations) DNO notification and engineering checks
- Electrical Safety Controls – Isolation, lock-off, and test-before-touch procedures to BS 7671:2018 (18th Edition IET Wiring Regulations) for all electrical renewable installations
- Working at Height – Roof-mounted solar PV and aerial installations trigger WAH 2005 hierarchy with edge protection, roof access, and rescue plan requirements
- Battery Storage Hazards – Thermal runaway risk controls, ventilation requirements, and fire suppression provisions for lithium-ion battery systems
Renewables Installation Types Covered
- Solar PV – Roof-mounted and ground-mounted photovoltaic systems; WAH controls for roof access; DC arc flash and live PV isolation procedures; G98/G99 DNO notification
- Air Source Heat Pumps – Outdoor unit positioning, refrigerant circuit commissioning, F-Gas leak testing, noise assessments, and electrical connection controls
- Ground Source Heat Pumps – Ground loop installation, borehole drilling, confined space and excavation controls, and refrigerant circuit filling
- Battery Storage Systems – Lithium-ion BESS installation; thermal runaway risk assessment; ventilation and fire detection requirements; electrical isolation procedures
- EV Charging Infrastructure – Domestic and commercial EV charger installation; cable routes and containment; earthing and bonding requirements; BS 7671 and PAS 1899 compliance
Regulatory Framework
- MCS 001 / MCS 012 – MCS installer certification standards for heat pumps and solar PV
- F-Gas Regulations 2015 (UK) – refrigerant handling, leak detection, F-Gas operator certificates, and refrigerant log obligations
- BS 7671:2018 – IET Wiring Regulations 18th Edition; electrical installation safety standard
- G98 / G99 – ENA Engineering Recommendations for connecting micro-generators to the public low voltage network
- PAS 1899:2022 – Electric vehicle smart charging equipment – specification for installation
- Work at Height Regulations 2005 – solar PV and aerial installation on roofs and towers
- CDM 2015 – duty holder obligations on notifiable renewable energy installation projects
- Electricity at Work Regulations 1989 – electrical safety during installation and commissioning
Related Modules
- RAMS Generator – General construction RAMS where renewables installation is part of a wider new-build or refurbishment project
- Building Services (M&E) RAMS – For mechanical and electrical installation works accompanying renewable energy systems
- COSHH Assessments – Assess refrigerants, flux, cleaning solvents, and other substances in renewables installation
- Roofing RAMS – Where roof works are required to prepare for or support solar PV installation
Start generating your Renewables RAMS free | View plans | RAMS Generator