Commercial Cladding & Facades RAMS — Generate in Minutes
Generate comprehensive RAMS documents for commercial cladding and facade installation. Covers rainscreen cladding, composite panels, terracotta facades, and fixings — with detailed working-at-height controls, dropped object prevention, and fire compliance for higher-risk buildings. UK principal contractors and facade subcontractors use this template to meet CDM 2015 duties and Building Safety Act 2022 requirements.
What a Commercial Cladding RAMS Covers
- Facade access systems — MEWPs, mast climbers, cradles, and rope access planning
- Panel handling and mechanical lifting including vacuum lifters and spreader beams
- Subframe and fixing installation method statements including anchor pull-out testing
- Sealant application with COSHH controls for isocyanate and solvent products
- Fire barrier and cavity closer installation per Building Safety Act 2022
- Exclusion zone management and dropped object prevention at ground level
- Non-combustible material verification and product substitution controls
Regulatory Framework
- CDM 2015 — principal contractor and contractor duties
- Work at Height Regulations 2005 — facade access hierarchy
- Building Safety Act 2022 — non-combustible cladding requirements for higher-risk buildings
- Approved Document B — fire safety and cladding specification
- COSHH Regulations 2002 — sealant and adhesive hazardous substances
- LOLER 1998 — vacuum lifters and MEWP thorough examination
Frequently Asked Questions
- What wind speed limits apply to facade installation?
- Most MEWP operations should cease above 28 mph. Large-panel crane lifts may need to stop at lower wind speeds. Specify wind monitoring and stop-work thresholds for each access method in your RAMS.
- Do I need a COSHH assessment for cladding sealants?
- Yes. Many facade sealants contain isocyanates or solvents classified as hazardous under COSHH Regulations 2002. A separate COSHH assessment with appropriate RPE including FFP3 or supplied air is required.
- How does the Building Safety Act 2022 affect cladding RAMS?
- On higher-risk buildings (18m+), cladding contractors must follow gateway processes, use non-combustible materials, and maintain a detailed installation record as part of the building’s golden thread of information. RAMS should reference the specification and product certificates.
- What dropped object controls are required?
- Establish a ground-level exclusion zone matching the height of work plus 6 metres, use debris netting, ensure tools and panels are tethered or secured, and appoint a signalman for crane-lifted panels.
- How long does it take to generate a cladding RAMS with RAMS AI?
- Most users complete a professional cladding RAMS document in under 20 minutes using the AI wizard. The system pre-populates trade-specific hazards, regulatory references, and method statement content tailored to facade works.